hawkes and son history?
-
- Posts: 167
- Joined: Sun Feb 06, 2011 4:23 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Birmingham (UK)
- Contact:
hawkes and son history?
hello! I'm sorry to arrive with questions - but I'm guessing that the obvious way to find internet forums is when you're looking for something, so I hope you'll excuse me.
Does anyone know of a good source of info on the history of Hawkes and Son? All I know is that they merged with Boosey to form Boosey and Hawkes in 1930. I'm asking because I have acquired what I think is probably a fife, though it may be a piccolo, made by Hawkes and Son, Denham Street. I have a feeling they had several addresses but have no idea of dates.
I didn't even set out to own it; I was looking for non-Dixon polymer flutes; it's the curse of ebay!
Does anyone know of a good source of info on the history of Hawkes and Son? All I know is that they merged with Boosey to form Boosey and Hawkes in 1930. I'm asking because I have acquired what I think is probably a fife, though it may be a piccolo, made by Hawkes and Son, Denham Street. I have a feeling they had several addresses but have no idea of dates.
I didn't even set out to own it; I was looking for non-Dixon polymer flutes; it's the curse of ebay!
sophie
- Sillydill
- Posts: 964
- Joined: Fri Apr 08, 2005 2:33 pm
- Please enter the next number in sequence: 1
- Location: Edge of Misery (Missouri) KC area
Re: hawkes and son history?
Hey Ducks,
CONGRATULATIONS!
Flute maker Dave Copley sent me the following information about Hawkes et al.
CONGRATULATIONS!
Flute maker Dave Copley sent me the following information about Hawkes et al.
The information I have on Hawkes if from the New Langwill Index. They show:
1860-62, Hawkes & Co, Cumberland St, Pimlico
1862-75, Hawkes & Co, 33 Soho Square
1875, Hawkes & Co, Leicester Square
1876-89, Riviere & Hawkes, Leicester Square
1889-95 Hawkes & Son, Leicester Square
1895-1930, Hawkes & Son, Denman St, Picaddilly Circus
Keep on Tootin!
Jordan
Jordan
-
- Posts: 167
- Joined: Sun Feb 06, 2011 4:23 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Birmingham (UK)
- Contact:
Re: hawkes and son history?
that's fantastic, thank you! I now know a lot more about it than I did - all I have to do now is wait and see if it's playable yet
sophie
Re: hawkes and son history?
Terry McGee has bits scattered about....
http://www.google.com/search?q=hawkes+s ... flutes.com
http://www.google.com/search?q=hawkes+s ... flutes.com
Picture a bright blue ball just spinning, spinning free
It's dizzying, the possibilities. Ashes, Ashes all fall down.
It's dizzying, the possibilities. Ashes, Ashes all fall down.
- Casey Burns
- Posts: 1488
- Joined: Sun Nov 16, 2003 12:27 pm
- Please enter the next number in sequence: 1
- Location: Kingston WA
- Contact:
Re: hawkes and son history?
There is a pretty decent writeup about Hawkes and Son on Wikipedia at
http://en.wikipedia.org/wiki/Boosey_%26_Hawkes
This site discusses serial numbers:
http://www.horniman.ac.uk/pdf/bandh_handlists_web.pdf
Dating these things can be tricky. Sometimes instruments were made by other manufacturers and then stamped with the well known brands. I just learned about this with saxophones that were stamped by Selmer but were made for them in the US by Buescher and Conn. Similar things were happening with flutes. I suspect that some American brands were actually made in London, and labeled here. The modern day example of this are Scottish Bagpipes supposedly manufactured in Scotland but are really made in Pakistan.
Globalization and outsourcing are really 19th century concepts!
http://en.wikipedia.org/wiki/Boosey_%26_Hawkes
This site discusses serial numbers:
http://www.horniman.ac.uk/pdf/bandh_handlists_web.pdf
Dating these things can be tricky. Sometimes instruments were made by other manufacturers and then stamped with the well known brands. I just learned about this with saxophones that were stamped by Selmer but were made for them in the US by Buescher and Conn. Similar things were happening with flutes. I suspect that some American brands were actually made in London, and labeled here. The modern day example of this are Scottish Bagpipes supposedly manufactured in Scotland but are really made in Pakistan.
Globalization and outsourcing are really 19th century concepts!
- Dominic Allan
- Posts: 304
- Joined: Sun Feb 16, 2003 6:00 pm
- Please enter the next number in sequence: 1
- Location: Bruton, UK
- Contact:
Re: hawkes and son history?
I've got a Riviere and Hawkes , I'll dig it out and post a picture later.
I make flutes - http://www.djallan.co.uk/page4.htm
- Sillydill
- Posts: 964
- Joined: Fri Apr 08, 2005 2:33 pm
- Please enter the next number in sequence: 1
- Location: Edge of Misery (Missouri) KC area
Re: hawkes and son history?
Well if we are gonna post pictures!
Here's my atypical Hawkes & Co., 33 Soho Square:
Note the wide German Silver Band over the socket on the head. The socket is lined (French style) and the wood of course cracked. So a previous owner, turned down the shoulder and fitted the ring.
I played this flute regularly a year ago, while I was in my small hole/Baroque phase. I really like the elegant key-work.
Here's my atypical Hawkes & Co., 33 Soho Square:
Note the wide German Silver Band over the socket on the head. The socket is lined (French style) and the wood of course cracked. So a previous owner, turned down the shoulder and fitted the ring.
I played this flute regularly a year ago, while I was in my small hole/Baroque phase. I really like the elegant key-work.
Keep on Tootin!
Jordan
Jordan
- Dominic Allan
- Posts: 304
- Joined: Sun Feb 16, 2003 6:00 pm
- Please enter the next number in sequence: 1
- Location: Bruton, UK
- Contact:
Re: hawkes and son history?
Riviere and Hawkes: (Left) one of my series 2 flutes(right)- I aquired this flute last year.
I make flutes - http://www.djallan.co.uk/page4.htm
- tucson_whistler
- Posts: 587
- Joined: Tue Jan 19, 2010 10:56 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Columbus, OH
- Contact:
Re: hawkes and son history?
thanks for the photos guys. beautiful.
Sindt D | Gene Milligan blackwood D | Burke low D | Olwell keyless blackwood Eb/D/C flute
http://shakespeareanreview.com/
http://shakespeareanreview.com/
- Dominic Allan
- Posts: 304
- Joined: Sun Feb 16, 2003 6:00 pm
- Please enter the next number in sequence: 1
- Location: Bruton, UK
- Contact:
Re: hawkes and son history?
Two things interest me:
1 My flute and Jordan's are potentially only a year or two apart, Jordans has small hole mine are large, when did that change or did they offer both types at some point?
2 The keywork looks a bit like mine, look at the g# touch on Jordans, also the foot joints on mine. My photo is very bad (cheap camera+ no aptitude for photography) The touch pieces are similar. I hadn't set eys on a Hawkes flute at the time when I designed my keywork.
1 My flute and Jordan's are potentially only a year or two apart, Jordans has small hole mine are large, when did that change or did they offer both types at some point?
2 The keywork looks a bit like mine, look at the g# touch on Jordans, also the foot joints on mine. My photo is very bad (cheap camera+ no aptitude for photography) The touch pieces are similar. I hadn't set eys on a Hawkes flute at the time when I designed my keywork.
I make flutes - http://www.djallan.co.uk/page4.htm
-
- Posts: 167
- Joined: Sun Feb 06, 2011 4:23 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Birmingham (UK)
- Contact:
Re: hawkes and son history?
They are gorgeous and put my tiny one to shame, it's rather tatty and has a crack. It's a project. No, really...
sophie
- Sillydill
- Posts: 964
- Joined: Fri Apr 08, 2005 2:33 pm
- Please enter the next number in sequence: 1
- Location: Edge of Misery (Missouri) KC area
Re: hawkes and son history?
Hey Dominic,
I very much like the key-work on your flute! Nice Tromlitz lever on your Fnat keys! Only thing missing is the RH touch for the Bb.
As I stated my Hawkes & Co. flute is atypical, it is a French style flute.
Jon C. has a 6-key Riviere & Hawkes that is one of the most powerful flutes I've ever played:
I very much like the key-work on your flute! Nice Tromlitz lever on your Fnat keys! Only thing missing is the RH touch for the Bb.
As I stated my Hawkes & Co. flute is atypical, it is a French style flute.
Jon C. has a 6-key Riviere & Hawkes that is one of the most powerful flutes I've ever played:
Keep on Tootin!
Jordan
Jordan
-
- Posts: 167
- Joined: Sun Feb 06, 2011 4:23 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Birmingham (UK)
- Contact:
Re: hawkes and son history?
ha, it arrived and it is (a) tiny (b) old and in need of TLC and (c) impossible for me to get a note out of for the D fingering, which may be my fault, but I'm usually pretty good at getting notes out of things. It's the playing them in a sensible order I have problems with oh, and (d) it appears to be in E, if we're using folk denomination. Odd. That's what you get for buying a pig inna poke!
I now have eighty bazillion questions which I think I need to start a new thread about. I'm sorry...
I now have eighty bazillion questions which I think I need to start a new thread about. I'm sorry...
sophie
- jemtheflute
- Posts: 6969
- Joined: Tue May 23, 2006 6:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: N.E. Wales, G.B.
- Contact:
Re: hawkes and son history?
Nah, stick to this one - we know where you are! Post some photos and ask away. Oh, and the pitch thing - assuming it isn't leaking so much you can't test properly, it is very likely in Eb and High Pitch to boot. Is it this one? If so, looks cute, nice box, decent price, quite a bit to do to make it playable, leave alone restore fully (probably not worth it - looks like it needs a new crown, which unless you have a tame wood turner won't be easy.....).ducks wrote:ha, it arrived and it is (a) tiny (b) old and in need of TLC and (c) impossible for me to get a note out of for the D fingering, which may be my fault, but I'm usually pretty good at getting notes out of things. It's the playing them in a sensible order I have problems with oh, and (d) it appears to be in E, if we're using folk denomination. Odd. That's what you get for buying a pig inna poke!
I now have eighty bazillion questions which I think I need to start a new thread about. I'm sorry...
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
-
- Posts: 167
- Joined: Sun Feb 06, 2011 4:23 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Birmingham (UK)
- Contact:
Re: hawkes and son history?
a tone sharp?! ow.
or it's supposed to be e flat and is a semitone sharp?
I don't think it's leaking much; though it does have a horrible crack in the head joint, it's pretty much sealed by the metal core (I knew the crack was going to be there). The notes I can get out of it are consistently a tone above what I'd expect for the fingering (in D for whistle/folk flute or C for Boehm). Having said that, I'm used to something either fully keyed or with none (unless you count the low keys on a tenor recorder) and haven't yet worked out what the keys I have on here actually do!
As I said, I didn't actually intend to buy this, I was looking for a simple flute/fife in low or high D and ended up taking a punt on something very cheap and potentially interesting; I'm a metalworker and thought that it would be interesting to see if I could transfer any of my skills in making/mending small, annoying and fiddly things to this.
I will post some pictures, if that's ok - it's a nice object, even if it's not working properly at the moment (though as I said, that might be me. Not convinced about that, though) - it still fits together beautifully and all the keys are in working order, with one loose pad. The decirative top bit is missing, but the plug is still there and functional.
thank you.
or it's supposed to be e flat and is a semitone sharp?
I don't think it's leaking much; though it does have a horrible crack in the head joint, it's pretty much sealed by the metal core (I knew the crack was going to be there). The notes I can get out of it are consistently a tone above what I'd expect for the fingering (in D for whistle/folk flute or C for Boehm). Having said that, I'm used to something either fully keyed or with none (unless you count the low keys on a tenor recorder) and haven't yet worked out what the keys I have on here actually do!
As I said, I didn't actually intend to buy this, I was looking for a simple flute/fife in low or high D and ended up taking a punt on something very cheap and potentially interesting; I'm a metalworker and thought that it would be interesting to see if I could transfer any of my skills in making/mending small, annoying and fiddly things to this.
I will post some pictures, if that's ok - it's a nice object, even if it's not working properly at the moment (though as I said, that might be me. Not convinced about that, though) - it still fits together beautifully and all the keys are in working order, with one loose pad. The decirative top bit is missing, but the plug is still there and functional.
thank you.
sophie